The Powersoft K3 DSP is a system amplifier is a system which, thanks to the combination of its characteristics, size and power output, delivers added value to its customers
This device relies on the same technology as the other models in the Powersoft K Series while providing superior sound quality, regardless of the implemented audio system. The K series is a choice made by many sound designers – because it provides superior power and headroom in the smallest possible unit.
The K3 DSP amplifier provides 1,400 W at 8 ohms or 2,600 W at 4 ohms. At low impedance rates, this device does not lose its strength, thanks to its current capacity of over 50 amperes per channel. The entire unit is wide only 19 inches, with a depth of 340 mm, and occupies a single rack space. It weighs about 9 kilograms.
The Powersoft K3 DSP has 50 internal preset memories, 150 possible preset locations on a preset card, the possibility of implementing firmware updates by the user, and AES3 digital input. With the new AudioSuite software, this system amplifier can be fully controlled via Ethernet network with the PC. All DSP parameters – including filter, limiter, gain, delay and routing functions – are configurable.
The K3 DSP has Armonia Pro Audio Suite software for remote control and monitoring of the entire range of Powersoftovih products. It allows online and offline system setup and tuning, as well as real-time management and monitoring of all vital functions from a remote PS via a single intuitive graphical user interface.
Armonia software has been recognized is a unique tool for significant improvement of performance and system reliability. More information about Armonia software can be found here.
|Design||Class-D technology with zero-latency, switchmode power supply with power factor correction|
|Operating modes||two channels or bridged|
|Power specifications||2 x 1400 W @ 8 Ohms
2 x 2600 W @ 4 Ohms
2 x 2800 W @ 2 Ohms
|Gain||26, 29, 32 or 35 dB switchable|
|Mains voltage||90 – 264 V, 50 / 60 Hz|
|Mains current||max. 8 – 16 A RMS adjustable|
|Mains connector||IEC 20 A|
|Preset memory space||50 presets internal, 150 on memory card|
|DSP||raised cosine equalization
2000 ms delay
FIR and parametric filters (IIR, highpass, lowpass, allpass)
definable peak- and power-limiter per channel
|Operation / remote||via built-in display or via network and Powersoft Armonia software|
|Digital input||AES / EBU switchable to XLR input of Ch2 or via RJ45|
|Output connectors||2 x speakON NL4 (pin 1/2 parallel)|
|Dimensions||19″ / 1 HU / 360 mm depth [0.75 in]|
|Weight||8,8 kg [19.4 lbs]|